sh-3.00$ traceroute us.archive.ubuntu.com
traceroute to us.archive.ubuntu.com (91.189.88.46), 64 hops max, 40 byte packets
1 LOGIN-GW.Login.COM (192.195.240.31) 1 ms 1 ms 1 ms
2 juniper1 (209.104.1.7) 0 ms 0 ms 0 ms
3 tcs-edge-02.inet.qwest.net (65.121.93.133) 1 ms 1 ms 1 ms
4 tcs-core-01.inet.qwest.net (205.171.212.41) 1 ms 1 ms 1 ms
5 * * *
6 * 63.146.27.34 (63.146.27.34) 25 ms 13 ms
7 vlan89.csw3.LosAngeles1.Level3.net (4.68.20.190) 20 ms vlan79.csw2.LosAngeles1.Level3.net (4.68.20.126) 21 ms vlan69.csw1.LosAngeles1.Level3.net (4.68.20.62) 17 ms
8 ae-93-93.ebr3.LosAngeles1.Level3.net (4.69.137.45) 25 ms ae-73-73.ebr3.LosAngeles1.Level3.net (4.69.137.37) 21 ms ae-93-93.ebr3.LosAngeles1.Level3.net (4.69.137.45) 21 ms
9 ae-2.ebr3.SanJose1.Level3.net (4.69.132.9) 31 ms 22 ms 22 ms
10 ae-83-83.csw3.SanJose1.Level3.net (4.69.134.234) 28 ms 22 ms 22 ms
11 ae-84-84.ebr4.SanJose1.Level3.net (4.69.134.249) 26 ms 22 ms 22 ms
12 ae-2.ebr4.NewYork1.Level3.net (4.69.135.186) 87 ms 93 ms 90 ms
13 ae-74-74.csw2.NewYork1.Level3.net (4.69.134.118) 86 ms 76 ms 76 ms
14 ae-71-71.ebr1.NewYork1.Level3.net (4.69.134.69) 76 ms ae-81-81.ebr1.NewYork1.Level3.net (4.69.134.73) 76 ms 76 ms
15 ae-42-42.ebr2.London1.Level3.net (4.69.137.69) 147 ms ae-43-43.ebr2.London1.Level3.net (4.69.137.73) 147 ms 148 ms
16 ae-1-100.ebr1.London1.Level3.net (4.69.132.117) 156 ms 148 ms 146 ms
17 ae-2.ebr2.London2.Level3.net (4.69.132.145) 156 ms 148 ms 146 ms
18 ae-26-52.car2.London2.Level3.net (4.68.117.48) 147 ms ae-26-54.car2.London2.Level3.net (4.68.117.112) 148 ms ae-26-56.car2.London2.Level3.net (4.68.117.176) 148 ms
19 195.50.121.2 (195.50.121.2) 147 ms 147 ms 147 ms
20 lithium.canonical.com (91.189.88.46) 161 ms 162 ms 162 ms

SMI  v0.3.1 has been released.

Grab it here.

-SH

There is a issue where the Fedora Kernel does not load the USBHID drivers as a module but rather as always enabled in the kernel. Because of this you cannot blacklist it and allow USB device pass through to VMWare guests. To allow for this you must rebuild the kernel with the CONFIG_USB_HID=y parameter in the kernel config changed to CONFIG_USB_HID=m

enjoy.

I’ve sorted the issues with building XBMC on F8/9/10 and am working once again on CentOS.

Packages / instructions are as always available @ http://www.fedorajunkies.com

Our queue (30+) has been successfully completed.  We’ve been having some issues of late keeping up with the free requests.  If you can even mail out just a couple DVDs or CDs to users who are unable to download please consider dropping me a line to help out

Thanks 🙂

-SH.